مدل دستگاه خود و کد یا خطای آنرا را وارد کنید:

گامی بسوی تشکیل بزرگترین مرجع و بانک سرویس مانویل کشور

ما برانیم تا نسبت به جمع آوری و تکمیل بزرگترین بانک سرویس مانویل کلیه ماشینهای اداری اعم از انواع  فتوکپی - دستگاه بنر - ریسوگراف - پرینتر - کپی پرینتر - پلاتر  - اسکنر و ... اقدام کنیم چنین مهمی با یاری و همکاری کلیه همکاران میسور خواهد بود ما را در این مهم یاری فرمایید.

هدیه ما برای شما  تخصیص یک صفحه تبلیغی حاوی بنر و عکس فروشگاه شما یا آرم دلخواهتان بهمراه متن های تبلیغی و آدرس و شماره های تماس شما و لینک سایتتان خواهد بود که برای همیشه در سامانه بارگزاری خواهد گردید و در معرض تماشای بازدید کنندگان قرار خواهد گرفت پس چنانچه دارای سرویس مانویلی هستید بهمراه اطلاعاتی که در صفحه تبلیغی می خواهید بارگزاری گردد به ما ایمیل فرمایید آدرس جی میل ما  1copida@gmail.com می باشد.

سرویس مانویل ارسالی خود را زیپ فرموده و سپس اتچ فرمایید توجه داشته باشید که سرویس مانویل های تکراری در سایت بارگزاری نخواهند شد.

شرکت کپیدا از یاری همکاران و دوستان و تمام کسانیکه که می خواهند در این کار سهیم باشند پیشاپیش کمال تشکر و امتنان را دارد.                                                        موفق و پایدار باشید.

کدهای ریسوگراف

ADVICE DISPLAYS

1. TROUBLE MESSAGES (T DISPLAY)

Display

Details

How to Cancel

 

T1

CALL SERVICE

TO RESUME OPERA-

TION PRESS START

KEY (while in master making.)

T2

CALL SERVICE

T3

CALL SERVICE

TO RESUME OPERA-

TION PRESS START

KEY.

Main Motor Lock

  • In 3 seconds from turning ON of ریسوگراف GR 3770 main motor, ریسوگراف GR 3770 A detection sensor light path is still held blocked.
  • In 8 seconds from turning ON of ریسوگراف GR 3770 main motor, ریسوگراف GR 3770 A detection sensor is not blocked.
  • When ریسوگراف GR 3770 fuse of ریسوگراف GR 3770 power supply PCB is gone.

Elevator Motor Lock

  • In 15 seconds from turning ON of ریسوگراف GR 3770 elevator motor in upward direction, ریسوگراف GR 3770 elevator upper limit sensor is not pushed.
  • In 15 seconds from turning ON of ریسوگراف GR 3770 elevator motor in downward direction, ریسوگراف GR 3770 light path of ریسوگراف GR 3770 elevator lower limit sensor

Press <ALL RESET> key.

Press <START> key.

Press <ALL RESET> key.

Press <ALL RESET> key.

Press <START> key.

 
 
 

is not blocked.

  • In 3 seconds from turning ON of ریسوگراف GR 3770 elevator motor in upward direction, ریسوگراف GR 3770 elevator lower sensor is held blocked.
  • In 3 seconds from turning ON of ریسوگراف GR 3770 elevator motor in downward direction, ریسوگراف GR 3770 elevator upper limit sensor is held pressed down.
  • When ریسوگراف GR 3770 fuse of ریسوگراف GR 3770 power supply PCB is gone.

Clamp Error (1)  (300/400 dpi types )

  • In 4 seconds from turning ON of ریسوگراف GR 3770 clamp solenoid in clamp retrial, ریسوگراف GR 3770 clamp safety switch is held still pressed down.
  • In 4 seconds from turning OFF of ریسوگراف GR 3770 clamp solenoid, ریسوگراف GR 3770 clamp safety SW has not been pressed.
  • In 8 seconds from turning ON of ریسوگراف GR 3770 clamp motor in opening direction in clamp retrial, ریسوگراف GR 3770 180° angular sensor has not
 

detected magnet.

• In 8 seconds from turning ON of ریسوگراف GR 3770 clamp motor in closing direction in clamp retrial, ریسوگراف GR 3770 0° angular sensor has not de-

 

tected magnet.

*In any of ریسوگراف GR 3770 above cases, master making is performed to ریسوگراف GR 3770 end.

 

T3

CALL SERVICE

TO RESUME OPERA-

TION PRESS START

KEY.

Clamp Error (1)  (600dpi type)

• In 1.5 seconds after ریسوگراف GR 3770 clamp motor is turned ON and ریسوگراف GR 3770 clamp safety SW is detached, both ریسوگراف GR 3770 0° and 180° angular sensors are held in OFF or ON state.

*Master making is performed to ریسوگراف GR 3770 end.

Press <ALL RESET> key.

Press <START> key.

 

T4

CALL SERVICE

Overflow

• When ink is in contact with ریسوگراف GR 3770 overflow sensor. ریسوگراف GR 3770 drum set switch need be pushed.

Overflow sensor OFF

< CLEAN >

 

Display

Details

How to Cancel

 

T5

CALL SERVICE

T6

CALL SERVICE

T7

TURN MAIN POWER

SW.  OFF ریسوگراف GR 3770N ON

T8

TURN MAIN POWER

SW.  OFF ریسوگراف GR 3770N ON

T9

TURN MAIN POWER

SW.  OFF ریسوگراف GR 3770N ON

T10

TURN MAIN POWER

SW.  OFF ریسوگراف GR 3770N ON

T11

CALL SERVICE

T12

T13

CALL SERVICE

T14

CALL SERVICE

Print Positioning Motor Lock

  • • In 12 seconds from turning ON of ریسوگراف GR 3770 print positioning motor, ریسوگراف GR 3770 vertical centering sensor is not turned ON/OFF.
  • • When ریسوگراف GR 3770 fuse of ریسوگراف GR 3770 main power PCB is gone

Pressure Detection Sensor Malfunction

  • • In 8 seconds from turning ON of ریسوگراف GR 3770 main motor, ریسوگراف GR 3770 pressure detection sensor is not turned ON/OFF.

Communication error between GR and Digitizer

  • • On occurrence of an error in communication between ریسوگراف GR 3770 CPU and Digitizer III.

Communication error between GR and Interface Accessaries

  • • On occurrence of an error in communication between ریسوگراف GR 3770 CPU and ریسوگراف GR 3770 interface accessaries.

Communication error between GR and ریسوگراف GR 3770 Sorters

  • • On occurrence of an error in communication between ریسوگراف GR 3770 CPU and ریسوگراف GR 3770 sorter (TM)

Malfunction of Trimming PCB or Image Processing PCB

  • • When ریسوگراف GR 3770 scanning contrast adjustment signal is not output from ریسوگراف GR 3770 image processing PCB.
  • • When ریسوگراف GR 3770 read start OK signal is not output from ریسوگراف GR 3770 image processing PCB.
  • • When ریسوگراف GR 3770 trimming signal is not output from Trimming PCB.

Pressure Control Motor Lock

  • • In 100ms from turning ON of ریسوگراف GR 3770 pressure control motor, ریسوگراف GR 3770 encoder sensor cannot detect a pulse.
  • • In 5 seconds from turning ON of ریسوگراف GR 3770 pressure control motor, ریسوگراف GR 3770 pressure centering sensor is not turned ON/OFF.
  • • When ریسوگراف GR 3770 fuse of ریسوگراف GR 3770 main power board is gone.

Unused.

Cutter Motor Lock

  • • After master cutting retrial with ریسوگراف GR 3770 drum held in C-2 position, when ریسوگراف GR 3770 master positioning sensor is in light-receiving state.

( Master cutting has failed in ریسوگراف GR 3770 2nd time. )

 Clamp Error (2)  300/400 dpi type

  • • If ریسوگراف GR 3770 actuator of ریسوگراف GR 3770 clamp safety switch is not depressed when ریسوگراف GR 3770 clamp solenoid is not in operation.

Press <ALL RESET> key.

Press <ALL RESET> key.

OFF -> ON

OFF -> ON

OFF -> ON

OFF -> ON

Press <ALL RESET> key.

∗  ∗  ∗

Drawer connector OFF (Pull out ریسوگراف GR 3770 drum.)

Press <ALL RESET> key.

 
 

Display

Details

How to Cancel

 

T14

CALL SERVICE

Clamp Error (2)  600 dpi type

  • • In 2 seconds from turning ON of ریسوگراف GR 3770 clamp motor in clamp unit home position return operation, ریسوگراف GR 3770 0° or 180° angular sensor has not detected magnet.
  • • In 2 seconds after ریسوگراف GR 3770 clamp motor gets ON and ریسوگراف GR 3770 0° or 180° angular sensor detects magnet in clamp unit home position return operation, ریسوگراف GR 3770 clamp safety SW has not been pushed.
  • • In 3 seconds after reverse rotation of ریسوگراف GR 3770 clamp motor in clamp unit home position return operation, ریسوگراف GR 3770 clamp safety SW has not been pressed.

*While in master making operation, ریسوگراف GR 3770 master making is performed to ریسوگراف GR 3770 end.

∗  ∗  ∗

 

T15

CALL SERVICE

Flat Bed Read Pulse Motor Lock  (300/400 dpi type )

  • • If ریسوگراف GR 3770 Image scanner home position sensor does not detect ریسوگراف GR 3770 Image scanner within 18898 pulses after ریسوگراف GR 3770 Flat bed read pulse motor is activated.
  • • If ریسوگراف GR 3770 Image scanner ADF Shading sensor does not detect ریسوگراف GR 3770

Image scanner within 15748 pulses after ریسوگراف GR 3770 Flat bed read pulse motor is activated.

  • • If ریسوگراف GR 3770 Image scanner is not release from ریسوگراف GR 3770 Image scanner home position sensor within 314 pulses after ریسوگراف GR 3770 Flat bed read pulse motor is activated.
  • • If ریسوگراف GR 3770 Image scanner is not released from ریسوگراف GR 3770 Image scanner ADF Shading sensor within 314 pulses after ریسوگراف GR 3770 Flat bed read pulse motor is activated.

Press <ALL RESET> key.

 

T15

CALL SERVICE

FB/R Pulse Motor Lock   (600 dpi type )

  • • In a fixed period of time from turning ON of ریسوگراف GR 3770 Flat bed read pulse motor, light path of ریسوگراف GR 3770 home position sensor is not blocked.
  • • In a fixed period of time from turning ON of ریسوگراف GR 3770 Flat bed read pulse motor, ریسوگراف GR 3770 home position sensor does not become light receiving state.
  • • In a fixed period of time from turning ON of ریسوگراف GR 3770 Flat bed read pulse motor, light path of ریسوگراف GR 3770 ADF shading sensor is not blocked.
  • • In a fixed period of time from turning ON of ریسوگراف GR 3770 Flat bed read pulse motor, ریسوگراف GR 3770 ADF shading sensor does not become light receiving state.
  • • When Image Scanner Release mode has not been executed. • When ریسوگراف GR 3770 Image scanner fixing metal has not been removed.

Press <ALL RESET> key.

 

T16

CALL SERVICE

T17

CALL SERVICE

REPLACE BATTERY

Position C Sensor Malfunction

Displayed to interrupt ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 Position C sensor status has not been changed from ON to OFF (or OFF to ON) within 8 seconds from ریسوگراف GR 3770 start of ریسوگراف GR 3770 Main Motor.

Replace Battery

Displayed to interrupt ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 Battery detection signal is OFF at eiریسوگراف GR 3770r of following three cases.

<1>  when ریسوگراف GR 3770 machine power is turned ON <2> when All reset button is pressed <3> at ریسوگراف GR 3770 end of machine operation.

Press <ALL RESET> key.

Power OFF -> ON

 

Display

Details

How to Cancel

 

T18

TURN MAIN POWER

SW.  OFF ریسوگراف GR 3770N ON

T19

CALL SERVICE

T20

CALL SERVICE

T50

CALL SERVICE

 T68

CALL SERVICE

T78

CALL SERVICE

Sorter Error

Displayed to interrupt ریسوگراف GR 3770 machine operation:

  • • If an error signal is received from ریسوگراف GR 3770 sorter.

ریسوگراف GR 3770rmal Pressure Motor Lock

Displayed to interrupt ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 TPH Pressure switch has not been depressed within 4 seconds after ریسوگراف GR 3770 TPH Pressure motor was activated to lower ریسوگراف GR 3770T PH.
  • • If ریسوگراف GR 3770 TPH Pressure switch has not been released within 4 seconds after ریسوگراف GR 3770 TPH Pressure motor was activated to raise ریسوگراف GR 3770T PH.

Wing Motor Lock

Displayed to interrupt ریسوگراف GR 3770 machine operation:

  • • If neiریسوگراف GR 3770r of ریسوگراف GR 3770 Jump wing sw1 or sw2 has been depressed within 5 seconds after ریسوگراف GR 3770 Wing motor was activated.
  • • If neiریسوگراف GR 3770r of ریسوگراف GR 3770 Jump wing sw1 or sw2 has been released within 5 seconds after ریسوگراف GR 3770 Wing motor was activated.

Connect “Copy/Master” Counter

  • • When ریسوگراف GR 3770 total counter or ریسوگراف GR 3770 master counter has not been connected.

SF3000 Power Supply Malfunction

  • • When no power is supplied to ریسوگراف GR 3770 SF3000.

Machine Model Selection Error

  • • When ریسوگراف GR 3770re is no machine type which corresponds to ریسوگراف GR 3770 code having been set in system PCB (SW2).

Power OFF -> ON

Press <ALL RESET> key.

Press <ALL RESET> key.

Electromagnetic counter setting signal L (Connect an electromagnetic counter.)

Following SW setting, power OFF ⇒ ON.

 

2. TROUBLE MESSAGES ( Oریسوگراف GR 3770RS )

Display

Details

How to Cancel

CHECK PAPER FEED

AREA

PAPER MISFEED

CHECK PAPER FEED

AREA AND PRESS

ALL RESET KEY

PAPER JAM

CHECK PAPER FEED

AREA

PAPER JAM ON

DRUM (PRINT CYLINDER)

REMOVE PAPER

PAPER JAM UNDER

DRUM

PULL OUT DRUM

PAPER JAM

REMOVE PAPER

UNDER PRINT CYLINDER

NO MASTER ON DRUM

PRESS ALL RESET KEY AND

MAKE A NEW MASTER

ORIGINAL MISFEED

OPEN ADF COVER

AND RESET ORIGINAL

ORIGINAL JAM

RESET ORIGINAL

/1

  • • If ریسوگراف GR 3770 safety switch over or under ریسوگراف GR 3770 Paper feed tray is activated.

Paper Jam in ریسوگراف GR 3770 First Paper Feed Area

Displayed to interrupt ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 Paper sensor has not detected paper while ریسوگراف GR 3770 Position A sensor detects ریسوگراف GR 3770 A position three times.

Paper Jam in ریسوگراف GR 3770 Second Paper Feed Area Displayed to interrupt ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 Paper sensor malfunctions.
  • • If ریسوگراف GR 3770 Paper sensor detects paper when ریسوگراف GR 3770 Pressure detection sensor detects ریسوگراف GR 3770 Pressure disc.
  • • If at ریسوگراف GR 3770 Drum A position, ریسوگراف GR 3770 Paper receiving sensor 1 does not detect paper and at ریسوگراف GR 3770 next Drum A position, ریسوگراف GR 3770 Paper sensor detects ریسوگراف GR 3770 paper.

Paper Jam under ریسوگراف GR 3770 Drum

Displayed to interrupt ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 Paper receive sensor 1 does not detect paper at ریسوگراف GR 3770

Drum A position and ریسوگراف GR 3770 Paper sensor does not detect ریسوگراف GR 3770 paper at ریسوگراف GR 3770 next Drum A position.

Paper Jam around Paper Receiving Sensor 1

Displayed to interrupt ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 Paper receiving sensor 1 detects paper when ریسوگراف GR 3770 Pressure detection sensor detects ریسوگراف GR 3770 Pressure disc.
  • • If ریسوگراف GR 3770 Paper receiving sensor 2 detects paper when ریسوگراف GR 3770 Paper receiving sensor 1 detects ریسوگراف GR 3770 next sheet of paper.

No Master on Drum

Displayed to interrupt ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 Master loading sensor does not detect master on ریسوگراف GR 3770 drum at ریسوگراف GR 3770 Drum C-1 position when ریسوگراف GR 3770 printing starts.

Original Misfeed

Displayed to interrupt ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 actuator of ریسوگراف GR 3770 Registration sensor is not opened within

1.35 seconds after ریسوگراف GR 3770 Original pickup motor was turned on.

Original Jam at Entrance

Displayed to interrupt ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 Original IN sensor has not detected an original within

630 pulses after ریسوگراف GR 3770 Read pulse motor was turned on.

• In ADF original setting, when ریسوگراف GR 3770 ADF original IN sensor has

Press Safety SW.  (Remove obstacles.)

Press <ALL RESET> key.

Make eiریسوگراف GR 3770r Paper Sensor OFF or Press <ALL RESET> key.

Drum set SW OFF ⇒ ON or press <ALL RESET> key.

Turn OFF Paper receiving Sensors 1/2  or Press <ALL RESET> key.

Press <ALL RESET> key.

ADF SW OFF ⇒ ON ADF SW  OFF⇒ON

been blocked from ریسوگراف GR 3770 beginning.

Display

Details

How to Cancel

ORIGINAL JAM

RESET

ORIGINAL

/3

ORIGINAL JAM

REMOVE ORIGINAL.

/2

MASTER MIS-FEED

REMOVE MASTER

ROLL ریسوگراف GR 3770N RE-

INSTALL

CLAMP ERROR

REMOVE MASTER

ROLL ریسوگراف GR 3770N RE-

INSTALL

TO RETURN OPERATION

PRESS START KE Y

MASTER CUT ERROR

REMOVE DRUM

(PRINT CYLINDER) AND

CHECK MASTER

REMOVE

CUT MASTER STRIP

Original Jam at ریسوگراف GR 3770 Exit

Displayed after ریسوگراف GR 3770 master has been loaded onto ریسوگراف GR 3770 Drum:

  • • If ریسوگراف GR 3770 Original OUT sensor has been blocked for 1 ,890 pulses after ریسوگراف GR 3770 Read pulse motor was turned on.

Oversize

Displayed after ریسوگراف GR 3770 master has been loaded onto ریسوگراف GR 3770 Drum:

  • • If ریسوگراف GR 3770 light path of ریسوگراف GR 3770 Original IN sensor is blocked for 14,173 pulses (FB type = 14,803)  after ریسوگراف GR 3770 Read pulse motor is turned on.

Master Mis-Feed

Displayed after ریسوگراف GR 3770 master has been loaded onto ریسوگراف GR 3770 Drum in ریسوگراف GR 3770 master making or confidential process:

  • • If ریسوگراف GR 3770 Master positioning sensor has not detected master material within 787 pulses (536 pulses in confidential process) after ریسوگراف GR 3770 Loading pulse motor started following ریسوگراف GR 3770 master cutting operation.

Displayed to interrupt ریسوگراف GR 3770 machine operation when ریسوگراف GR 3770 Master loading button was pressed:

  • • If ریسوگراف GR 3770 Master positioning sensor has not detected master material within 1260 pulses after ریسوگراف GR 3770 Loading pulse motor was turned on.
  • • If ریسوگراف GR 3770 Master positioning sensor has not detected master material within 787 pulses after ریسوگراف GR 3770 Loading pulse motor was turned on following ریسوگراف GR 3770 operation of ریسوگراف GR 3770 Cutter motor and ریسوگراف GR 3770 cut master material is removed.

Master Loading Error (onto ریسوگراف GR 3770 Drum)

Displayed to interrupt ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 Master load sensor does not detect master at ریسوگراف GR 3770 Drum C-1 position during loading of ریسوگراف GR 3770 master on ریسوگراف GR 3770 Drum.

Master Cut Malfunction

Displayed to interrupt ریسوگراف GR 3770 machine operation in master-making and confidential process:

  • • If master is detected by ریسوگراف GR 3770 Master positioning sensor at Drum A position after ریسوگراف GR 3770 cutting operation and besides it is not detected by ریسوگراف GR 3770 Master positioning sensor at ریسوگراف GR 3770 next Drum A position detection after ریسوگراف GR 3770 second cutting operation.

A Cut Piece of Master Remains inside ریسوگراف GR 3770 Machine

Displayed:

• If ریسوگراف GR 3770 Master positioning sensor detects master material (ریسوگراف GR 3770 reflected light) just after ریسوگراف GR 3770 master cut operation is completed.

ADF SW   OFF⇒  ON

ADF cover setting SW  OFF ⇒

ON

Master making unit setting SW OFF ⇒ ON

Master loading unit setting SW

OFF⇒ ON

 Press <START> key.

Drawer connector OFF  (Pull out drum.)

Master positioning sensor

OFF

Display

Details

How to Cancel

DISPOSAL ERROR

REMOVE DRUM (PRINT

CYLINDER) AND

DISCARD MASTER

TO RETURN OPERATION

PRESS START KEY

REMOVE

JAMMED MASTER

IN DISPOSAL UNIT

EMPTY

DISPOSAL BOX

CLOSE SHEET

FEEDER COVER AND

PRESS ALL RESET KEY

PAPER JAM IN

SORTER

CHECK SORTER

CLOSE SORTER’S COVER

PAPER REMAINING

IN SORTER

REMOVE PAPER

SORTER BIN FULL REMOVE PAPER

WRONG PAPER SIZE

SELECTION

CHANGE SELECTION

PAPER SIZE NOT

ACCEPTABLE FOR

SORTER

Master Removal Error

Displayed after ریسوگراف GR 3770 Image scanning and Master making operations are completed or in ریسوگراف GR 3770 confidential operation:

  • • If ریسوگراف GR 3770 Master removal sensor does not detect a removed master while ریسوگراف GR 3770 Drum rotates from C-1 to A position, during master removal operation.
  • • If ریسوگراف GR 3770 light path of ریسوگراف GR 3770 Master removal sensor is still blocked by a removed master when ریسوگراف GR 3770 Vertical transport motor stops.

*ریسوگراف GR 3770 above checking operation is performed before master removal only when a master exists on ریسوگراف GR 3770 drum.

Removed Master Jammed at ریسوگراف GR 3770 entrance of Master disposal box

Displayed:

  • • If ریسوگراف GR 3770 light path of ریسوگراف GR 3770 Master removal sensor is blocked at ریسوگراف GR 3770 start of master-making operation.
  • • If ریسوگراف GR 3770 light path of ریسوگراف GR 3770 Master removal hook sensor is not blocked at ریسوگراف GR 3770 start of master-making operation.

Empty Disposal Box

Displayed after ریسوگراف GR 3770 machine operation is finished:

  • • If ریسوگراف GR 3770 disposed master is detected 40 times (50 for A4-drum models) by ریسوگراف GR 3770 Master removal sensor after ریسوگراف GR 3770 Disposal box was emptied.

“SF3000” Bulk Sheet Feeder Error

Displayed to interrupt ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 Bulk sheet feeder malfunctions.

Sorter Error - Paper jammed in Sorter Displayed to interrupt ریسوگراف GR 3770 machine operation:

  • • If paper has jammed in ریسوگراف GR 3770 sorter.

Sorter Error - Sorter door (or cover) is open Displayed to prevent ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 door (or cover) of ریسوگراف GR 3770 sorter is open.

Sorter Error - Paper remains in Sorter Displayed to prevent ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 sorted sheets remain in ریسوگراف GR 3770 sort bins.

Sorter Error - Sorter bins are full

Displayed to interrupt ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 sort bins are full of sorted sheets.

Sorter Error - Wrong paper size is selected Displayed to prevent ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 paper size selection on ریسوگراف GR 3770 sorter does not match with ریسوگراف GR 3770 size of ریسوگراف GR 3770 paper loaded on ریسوگراف GR 3770 Paper feed tray.

Sorter Error - Unavailable paper size

Displayed to prevent ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 size of ریسوگراف GR 3770 paper loaded on ریسوگراف GR 3770 Paper feed tray is out of ریسوگراف GR 3770 range of paper size which can be used in ریسوگراف GR 3770 sorter.

Drum set SW  OFF ⇒ ON

Push <START> key.

Master removal sensor  OFF,

Master removal hook sensor

ON

Master disposal box setting

SW   OFF⇒ ON,  Disposal box master sensor OFF

Turn ON bulk sheet feed cover setting SW and, ریسوگراف GR 3770n, push < ALL RESET> key.

Cover SW ON

Connection SW ON

Door SW ON

Remove paper and, ریسوگراف GR 3770n, turn ON cover SW (door SW).

Remove paper and, ریسوگراف GR 3770n, turn ON cover SW (door SW).

Remove paper and, ریسوگراف GR 3770n, turn ON cover SW (door SW). Or, reset paper size.

Change paper size.

3. SETTING CONFIRMATION MESSAGES

Display

Details

How to Cancel

CLOSE

FRONT COVER

ADD PAPER

SET DRUM

IN PLACE

INSTALL

PRINT CYLINDER

WRONG-SIZE DRUM (PRINT CYLINDER) INSTALLED

WRONG-TYPE DRUM (PRINT

CYLINDER) INSTALLED

INSTALL INK CARTRIDGE

WRONG-TYPE

INK CARTRIDGE

INSTALLED

SET (INSTALL) MASTER

DISPOSAL BOX

CLOSE SCANNER

TABLE

CLOSE ADF COVER

CLOSE MASTER

LOADING UNIT

SET LEAD EDGE OF

MASTER

UNDER

GREEN FILM

Close Front Cover

Displayed to prevent ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 metal plate is not attached to ریسوگراف GR 3770 Front cover set sensor.

Add Paper

Displayed to interrupt ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 light path of ریسوگراف GR 3770 Paper detection sensor is open.

Set Drum in Place

Displayed to prevent ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 actuator of ریسوگراف GR 3770 Drum set switch is not depressed.

Drum Size Error

Displayed to prevent ریسوگراف GR 3770 machine operation:

  • • If a wrong size drum is set in ریسوگراف GR 3770 machine.

Drum Brand Error

Displayed to prevent ریسوگراف GR 3770 machine operation:

  • • If a wrong brand drum is set in ریسوگراف GR 3770 machine.

Set Ink Cartridge in Place

Displayed to prevent ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 actuator of ریسوگراف GR 3770 Ink bottle switch is not depressed.

Ink Cartridge Brand Error

Displayed to prevent ریسوگراف GR 3770 machine operation:

  • • If a wrong type of ink cartridge is set in ریسوگراف GR 3770 machine.

Set Master Disposal Box in Place

Displayed to prevent ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 actuator of ریسوگراف GR 3770 Disposal box set switch is not depressed.

Close Scanner Table

Displayed to prevent ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 safety switch is not pressed by ریسوگراف GR 3770 Scanner table.

Close ADF Unit

Displayed to prevent ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 actuator of ریسوگراف GR 3770 ADF unit set switch is not depressed.

Close Master Loading Unit

Displayed to prevent ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 actuator of ریسوگراف GR 3770 Master loading unit switch is not depressed.

Set Leading Edge of Master Under Green Films Displayed to prevent ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 Master detection sensor does not detect master material ( ریسوگراف GR 3770 reflected light ).

Front cover set sensor ON

Paper detection sensor ON

Drum set SW ON

Ink bottle SW  ON

Disposal box set SW ON

Scanner table set SW ON

Interlock SW ON

ADF unit set SW ON

Master loading unit SW

Master detection sensor ON

Display

Details

How to Cancel

INSERT CARD

IN KEY/CARD

COUNTER

Insert Card into Key/Card Counter

Displayed to prevent ریسوگراف GR 3770 machine operation:

• If an operator card is not set in ریسوگراف GR 3770 Key/Card counter.

Set a card.

4. CHANGE-OF-CONSUMABLES MESSAGES

Display

Details

How to Cancel

REPLACE

INK CARTRIDGE

REPLACE

MASTER ROLL

Replace Ink Cartridge

Displayed to interrupt ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 Ink sensor does not detect ink in ریسوگراف GR 3770 Squeegee unit within 30 seconds after ریسوگراف GR 3770 Inking motor was started.

Replace Master Roll

Displayed to interrupt ریسوگراف GR 3770 machine operation:

  • • If ریسوگراف GR 3770 black tape attached at ریسوگراف GR 3770 end of ریسوگراف GR 3770 Master roll has been detected by ریسوگراف GR 3770 Master end sensor during master making or confidential operation.

Ink bottle set SW  OFF ⇒ ON

Master detection sensor OFF ⇒ ON  (Master roll need to be replaced.)

 

 

 

0 1 1 1 1 1 1 1 1 1 1